LiftMaster CSW200UL CSW200UL W/ SURGE SUPPRESSION & RADIO RECEIVER Manual - Page 36

Maintenance and Operation, IMPORTANT SAFETY INSTRUCTIONS - elite

Get LiftMaster CSW200UL PDF manuals and user guides View all LiftMaster CSW200UL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Maintenance and Operation Important Safety Instructions To reduce the risk of SEVERE INJURY or DEATH: 1. READ AND FOLLOW ALL INSTRUCTIONS. 2. NEVER let children operate or play with gate controls. Keep the remote control away from children. 3. Always keep people and objects away from the gate. NO ONE SHOULD CROSS THE PATH OF THE MOVING GATE. 4. Test the gate operator monthly. The gate MUST reverse on contact with a rigid object or stop when an object activates the non-contact sensors. After adjusting the force or the limit of travel, retest the gate operator. Failure to adjust and retest the gate operator properly can increase the risk of INJURY or DEATH. 5. Use the emergency release ONLY when the gate is not moving. 6. KEEP GATES PROPERLY MAINTAINED. Read the owner's manual. Have a qualified service person make repairs to gate hardware. 7. The entrance is for vehicles ONLY. Pedestrians MUST use separate entrance. 8. Disconnect ALL power BEFORE performing ANY maintenance. 9. ALL maintenance MUST be performed by a Chamberlain Elite professional. 10. SAVE THESE INSTRUCTIONS. MAINTENANCE: 1. Disconnect power before servicing. 2. The gate area should be kept clean to insure proper operation. 3. Make sure the hinges are working smoothly and lubricated properly. 4. Make sure gate arm is greased properly. 5. Check gate reversing sensor. Check it monthly. 6. Check for proper synthetic oil level in the upper gear box (10W-30 weight synthetic oil). 7. Severe or high cycle usage will require more frequent maintenance checks. 8. Inspection and service should always be performed anytime a malfunction is observed or suspected. 9. When servicing, please do some "house cleaning" of the operator and the area around the operator. Pick up any debris in the area. Clean the operator as needed. 10. It is suggested that while at the site voltage readings be taken at the operator. Using a Digital Voltmeter, verify that the incoming voltage to the operator is within ten percent of the operators rating. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
34
MAINTENANCE:
1.
Disconnect power before servicing.
2.
The gate area should be kept clean to insure proper operation.
3.
Make sure the hinges are working smoothly and lubricated properly.
4.
Make sure gate arm is greased properly.
5.
Check gate reversing sensor. Check it monthly.
6.
Check for proper synthetic oil level in the upper gear box (10W-30 weight synthetic oil).
7.
Severe or high cycle usage will require more frequent maintenance checks.
8.
Inspection and service should always be performed anytime a malfunction is observed or suspected.
9.
When servicing, please do some “house cleaning” of the operator and the area around the operator. Pick up any debris in the area.
Clean the operator as needed.
10.
It is suggested that while at the site voltage readings be taken at the operator. Using a Digital Voltmeter, verify that the incoming
voltage to the operator is within ten percent of the operators rating.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of SEVERE INJURY or DEATH:
1.
READ AND FOLLOW ALL INSTRUCTIONS.
2.
NEVER let children operate or play with gate controls.
Keep the remote control away from children.
3.
ALWAYS keep people and obJects away from the gate.
NO ONE SHOULD CROSS THE PATH OF THE MOVING
GATE.
4.
Test the gate operator monthly. The gate MUST reverse
on contact with a rigid obJect or stop when an obJect
activates the non-contact sensors. After adJusting the
force or the limit of travel, retest the gate operator.
Failure to adJust and retest the gate operator properly
can increase the risk of INjURY or DEATH.
5.
Use the emergency release ONLY when the gate is not
moving.
6.
KEEP GATES PROPERLY MAINTAINED. Read the
owner’s manual. Have a qualified service person make
repairs to gate hardware.
7.
The entrance is for vehicles ONLY. Pedestrians MUST
use separate entrance.
8.
Disconnect ALL power BEFORE performing ANY
maintenance.
9.
ALL maintenance MUST be performed by a
Chamberlain Elite professional.
10.
SAVE THESE INSTRUCTIONS.
Maintenance and Operation