LiftMaster RSW12V RSW12V Install Manual - Page 9

INTRODUCTION » OPERATOR SPECIFICATIONS + CARTON INVENTORY + HARDWARE INVENTORY OPERATOR SPECIFICATIONS This model is intended for use in vehicular swing gate applications: Gate Classifications: Main Supply (Motor): Accessory Power: Current Consumption: Battery Charger Supply: Heater Draw (Optional): Main AC Supply: DC Absorbed Power: Solar Power Max: Maximum Gate Weight/Length: Daily Cycle Rate using transformer power: Maximum Gate Travel Range: Temperature: Control Board Fuse: CLASS I & II 12 Vdc 12 V nominal Class II battery voltage source is limited to: • Solar or AC Cable up to 50 feet - 500 mA • AC Cable 50 feet up to 250 feet - 250 mA • AC Cable 250 feet up to 1000 feet - 100 mA NOTE: Increased accessory power drawn from the operator will shorten the battery life. 5 Amps at 120 Vac 13.5 Vac, 30 Va, Direct Plug in Power Supply, Class II Compliant 325 watts 120 Vac 2 Amps 12 V at 30 watts max. 400 lbs. / 16 ft. long 600 lbs. / 12 ft. long 700 lbs. / 10 ft. long 800 lbs. / 8 ft. long 1000 lbs. / 6 ft. long 250 cycles/day 115 degrees -20°C to 40°C (-4°F to 104°F) without Heater -40°C to 40°C (-40°F to 104°F) with Heater 30 Amp (2) 27.66" 17" SIDE VIEW 13.6" FRONT VIEW MOUNTING FOOTPRINT 14" 12.2" 13.6" 17" CARTON INVENTORY • Operator • Operator arm assembly • Transformer • Documentation Packet • Battery 12 Vdc 7AH (1) • Keys (2) HARDWARE INVENTORY • Warning Signs (2) • Warranty Card 8