Linksys FENSK05-CA User Guide - Page 15

Linksys EtherFast® Series 11. Optional: Choose the Access Control tab. Ensure that Shared-level access control is selected. If the setting is on User-Level access control and you can't change it, skip to problem 5 in the Troubleshooting section on page 45. 12. Click the OK button. Your system may or may not ask you for your Windows 95 CD-ROM or the location of the Windows 95 installation files. If you have your Windows CD-ROM, direct Windows to D:\win95 (where D: is your CD-ROM Drive) , or to C:\windows\ options\cabs if you don't. 13. Once Windows has copied the necessary files, the System Settings Change window appears. Remove all disks from your PC and click on Yes to restart your PC. If you don't see this window, simply shut down Windows 95 and restart your PC. Remember to remove the installation disk and CD-ROM, if necessary, prior to rebooting. 10/100 Network In a Box 14. A Logon window will appear, requiring you to enter a username and password. Make up a username and password and click OK. Do not click the ESC or Cancel buttons, or you won't be able to log onto the network. If the a logon does not appear or if it does not allow you to log on, refer to problems 3 and 4 in the Troubleshooting section on page 44. 15. Once you are at the Windows 95 desktop, double-click on the Network Neighborhood icon. You should see an icon for the entire network and the names of the other PCs on the network. Open the Entire Network icon. • If you can see your computer along with all the other computers on the network in Network Neighborhood, then the Windows 95 network configuration is complete. Continue with Sharing Your Files and Printers on page 49 if you want data from your PC to be available to others on the network. You may stop here, however, if you wish to configure File and Printer Sharing at a later time. • If you don't see anything at all in Network Neighborhood, press the F5 key on your keyboard a few times to refresh the screen. If that doesn't work, go to problem 8 of the Troubleshooting section on page 45. • If you only see your own computer in Network Neighborhood, skip to problem 6 of the Troubleshooting section on page 45. • If you see all computers on the network except yours press the F5 key a few times. If, after a minute or so, you still can't see your own PC, see problem 7 on page 45 of the Troubleshooting section. • If you only see computers that are running the same operating system as you and you don't see any others, go to problem 10 on page 46. 24 25