Linksys NAS200 User Guide - Page 32

Chapter 4 Use 4. Enter your new password in the New Password and Confirm New Password fields. 5. Click Save to save your new password, or click Cancel to clear your change. Folders Browser -- Current Folder Select the location of the shared folder that you want to specify as the current folder. -- New Folder To create a new folder, enter its name, and then click Create. Select the new folder from the list, and its path appears in the Current Folder field. Click Apply to save the location. Click Close to exit this screen. •• The Remote Server Requires Authentication If authentication is required to access the URL, select this feature, and complete the following: -- User Name Enter the user name used to access the URL. -- Password Enter the password used to access the URL. NOTE: For more information about authentication for the remote server, contact the administrator of the remote server. Click Save to save the new download task, or click Cancel to clear your changes. Start/Stop Select the appropriate download task, and then click Start/Stop to start or stop the selected task. Cancel If you want to delete a download task, select it, and then click Cancel. (Completed tasks are not automatically deleted, so you will have to manually delete them.) Refresh Click Refresh to update the on-screen status information. My Files > Personal Info Any user can change the password to the My Files section. To change your password: 1. Click Personal Info. 2. Enter your login name in the User Name field. 3. Enter your current password in the Current Password field. Network Storage System with 2 Bays My Files > Personal Info USB Storage Devices You can connect USB storage devices to the USB ports at any time. User accounts do not apply to USB storage devices. All folders and files on those devices are available to all users while the USB storage devices are connected to the Network Storage System. For convenience, you can use the Network Drive Mapping Utility to map a connected USB storage device as a network drive on your computer. You can also use the utility to remove the device. How to Add a USB Storage Device To add a USB storage device, connect the device to the USB 1 or USB 2 port. When the corresponding USB LED lights up, the USB device is available for use. How to Remove a USB Storage Device To safely remove a USB storage device: 1. Linksys recommends that you wait until the device is not being used, when its USB LED is continuously lit. Press the USB 1 button to eject the device from the USB 1 port, or press the USB 2 button to eject the device from the USB 2 port. Back Panel 28