Linksys OGV200 User Guide - Page 8

Network Optimizer for Gaming and VoIP Chapter 3: Setting up and Installing the Network Optimizer Overview This chapter explains how to set up and install the Network Optimizer. Before you begin, make sure you have an active Internet Connection, then follow the steps below to install the Network Optimizer. Installation 1. Remove the Ethernet network cable from your broadband modem and connect it to the Network Optimizer's ROUTER port. 2. Connect the included Ethernet network cable to your broadband modem, then connect the other end to the Network Optimizer's MODEM port. 3. Connect the included power adapter to the Network Optimizer's Power port, then connect the other end to a standard electrical outlet. When the MODEM and ROUTER lights start flashing, about one minute, the Network Optimizer is ready for use. Congratulations! Installation is complete. ROUTER Port Figure 3-1: ROUTER port MODEM port Figure 3-2: MODEM port Chapter 3: Setting up and Installing the Network Optimizer Overview Power port Figure 3-3: Power port 4