Linksys PCMLM56 User Guide - Page 17
Driver Setup, Windows 98 Setup - driver for
UPC - 745883548958
View all Linksys PCMLM56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Windows 98 Driver Setup This user guide contains the instructions for setting up the EtherFast 10/100 + 56K Modem PC Card under Windows 95, 98 and NT 4.0. Check the diskette for instructions on configuring the PC Card under all of the other operating systems that the card supports. Linksys does not write, maintain, or provide technical support for the Linux operating system. Drivers for Linux may be obtained from the World Wide Web. You can also check the Linux page on the Linksys web site. Linksys does not provide technical support for beta or freeware operating systems. Windows 98 Setup Follow the instructions below to install your EtherFast 10/100 + 56K Modem PC Card on Microsoft Windows 98. After installing the EtherFast 10/100 + 56K Modem PC Card hardware in your computer, follow the instructions below to install the EtherFast 10/100 + 56K Modem PC Card's Windows 98 network driver from the card's program disk. The following setup instructions are for setting up your EtherFast 10/100 + 56K Modem PC Card on the Final Release of Microsoft Windows 98 Only. The drivers included on the program disk are not compatible with any beta version of Microsoft Windows 98. Please keep in mind that the installation procedure for the driver will vary slightly depending on the version of Windows 98 you are using and your current system configuration. 15