Linksys PCMLM56 User Guide - Page 32
Client for, Microsoft Networks
UPC - 745883548958
View all Linksys PCMLM56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Windows 95 6. Make sure that the following network components are installed: Client for Microsoft Networks Client for Netware Network Linksys EtherFast 10/100 + 56K PC Card (PCMLM56) IPX/SPX-compatible Protocol NetBEUI There may be other components listed in addition to the ones shown above. This is fine. However, if any components listed above are missing, you'll need to install them manually. Refer to page 76 in the Troubleshooting section of this user guide. For setup of the TCP/IP protocol, contact your system administrator or consult Microsoft's documentation. Linksys does not supply technical support for setup or troubleshooting of the TCP/IP protocol. 7. In the Primary Network Logon box, select Client for Microsoft Networks. 30
6. Make sure that the following network components are
installed:
Client for Microsoft Networks
Client for Netware Network
Linksys EtherFast 10/100 + 56K PC Card (PCMLM56)
IPX/SPX-compatible Protocol
NetBEUI
There may be other components listed in addition to the
ones shown above. This is fine. However, if an
y compo
-
nents listed abo
v
e are missing
, you'll need to install
them manually. Refer to page 76 in the Troubleshooting
section of this user guide.
For setup of the TCP/IP protocol, contact your system
administrator or consult Microsoft’s documentation.
Linksys does not supply technical support for setup or
troubleshooting of the TCP/IP protocol.
7. In the Primary Network Logon box, select
Client for
Microsoft Networks
.
30
Windows 95