Linksys PCMLM56 User Guide - Page 50
Start, Settings, Control Panel, Devices, Close
UPC - 745883548958
View all Linksys PCMLM56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Windows NT If You Have Problems If the EtherFast 10/100 + 56K PC Card's coupler doesn't light up after you restart your computer, you may need to change your slot's boot setting in NT. Follow these instructions: Click on Start, Settings, Control Panel. Double-click on the Devices icon. Scroll down in the Devices list to EtherFast 10/100 + 56K PC Card. Click on Startup. Verify that the Startup Type is set to Boot. If it isn't, use your mouse to select it. Click OK, then Close. Choose to restart your computer. Note: If you receive errors about event log storage or if there is not enough storage space to restart the server, you need to reapply the NT service packs. 48
If You Have Problems
If the EtherFast 10/100 + 56K PC Card's coupler doesn't
light up after you restart your computer, you may need
to change your slot's boot setting in NT.
Follow these instructions:
Click on
Start
,
Settings
,
Control Panel
. Double-click
on the
Devices
icon. Scroll down in the Devices list to
EtherFast 10/100 + 56K PC Card
. Click on
Startup
.
Verify that the Startup Type is set to
Boot
. If it isn't, use
your mouse to select it. Click
OK
, then
Close
. Choose
to restart your computer.
Note
: If you receive errors about event log storage or if
there is not enough storage space to restart the server,
you need to reapply the NT service packs.
48
Windows NT