Linksys SPA2002-ER User Guide - Page 12

o Note: The user names for both administrator and User are fixed and cannot be changed. o After making changes to SPA configuration parameters, pressing "Submit All Changes" button will apply all the changes and if necessary, automatically reboot the device. Multiple changes may be made on multiple page tabs of the web interface at the same time. Pressing "Submit All Changes" will apply all the modifications. Important Note: switching between page tabs won't apply the changes to SPA, The only way to apply the changes is to press the "Submit All Changes" button. o If the "Undo All Changes" button is clicked, any modifications to profile parameters on any and all pages will be reset back to their original values before modification. NOTE: Pressing the "Undo All Changes" has no effect on the SPA; it will only reset the values on the web page. 3.3.2. Administration Privileges The SPA supports two levels of administration privileges: Administrator and User, both privileges can be password protected. Important note: by factory default, there are no passwords assigned for both Administrator and User. The Administrator has the privilege to modify all the web profile parameters and can also modify the passwords of both Administrator and User. A User only has the privilege to access part of the web profile parameters; the parameter group that User can access is specified by the Administrator, which can only be done through provisioning. To access the Administrator level privilege, use URL: http://IP_Address_Of_SPA/admin/. If the password has been set for Administrator, the browser will prompt for authentication. The username for Administrator is "admin" and cannot be changed. To access the User level privilege, use URL: http://IP_Address_Of_SPA/. If the password has been set for User, the browser will prompt for User authentication. The username for User is "user" and cannot be changed. When browsing Administrator pages, one can switch to User privileges by click the link "User Login". (Note: if User password was set, the browser will prompt for User authentication when you click "User Login" link). On the other side, from the User pages you can switch to Administrator privilege by clicking the link "Admin Login." Authentication is needed if Administrator password has been set. Warning: Switching between the User and Administrator will discard the uncommitted changes that have already been made on the web pages. 3.3.3. Basic and Advanced Views The web configuration interface provides a Basic and an Advanced view from which the various configuration parameters can be accessed. The SPA Provisioning tab is only visible from the Advanced Administrator view of the web interface. Warning: Switching between the basic and advanced view will discard the uncommitted changes that have already been made on the web pages. 3.3.3.1. Resync URL Through Resync URL you can force the SPA to do a resync to a profile specified in the URL. Note: The SPA will resync only when it is idle. The syntax of Resync URL is: © 2003 - 2004 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2) 12