Linksys SPA2002-ER User Guide - Page 13
Configuration Parameters - admin password
UPC - 745883568222
View all Linksys SPA2002-ER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
http:///resync?[[protocol://][server-name[:port]]/profile-pathname] If no parameter follows "/resync?", the profile rule setting in provisioning is used. See Error! Reference source not found. for detailed information about profile rule in provisioning If no protocol is specified, TFTP protocol is assumed. Note: Only TFTP is supported in the current release. If no server-name is specified, the host that requests the URL is used as server-name. If no port specified, default port of the protocol is used - 69 for TFTP. The profile-path is the path to the new profile to resync with. For example: http://192.168.2.217/upgrade?tftp://192.168.2.251/spaconf.scf 3.3.3.2. Reboot URL Through the Reboot URL, you can reboot the SPA. Note: Upon request, the SPA will reboot only when it is idle. The Reboot URL is: http:///admin/reboot 3.4. Configuration Parameters 3.4.1. System Parameters System Configuration Parameter Name Description Restricted Access Domains Enable Web Server Enable Web Admin Access Admin Password User Password This feature is used when implementing software customization. Enable/disable web server of SPA This feature should only be used on firmware version 1.0.9 or later. Enable/disable Admin pages of web server of SPA The password for administrator The password for User Default Yes Yes Parameter Name DHCP Host Name Domain Static IP NetMask Gateway Primary DNS Secondary DNS Network Configuration Description Enable/Disable DHCP Host Name of SPA The network domain of SPA Static IP address of SPA, which will take effect if DHCP is disabled The NetMask used by SPA when DHCP is disabled The default gateway used by SPA when DHCP is disabled DNS server used by SPA in addition to DHCP supplied DNS servers if DHCP is enabled; when DHCP is disabled, this will be the primary DNS server. DNS server used by SPA in addition to DHCP supplied DNS servers if DHCP is enabled; when DHCP is disabled, this will be the secondary DNS server. Default Yes 0.0.0.0 255.255.255. 0 0.0.0.0 0.0.0.0 0.0.0.0 © 2003 - 2004 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2) 13