Linksys SPA2002-ER User Guide - Page 62

VoIP User 2-8 Password compute the credentials using this password, or the INVITE will be challenged with a 401 response Same as above with '1' replaced by '2' - '8' [blank] 4.14.4. PSTN Line - PSTN-To-VoIP Gateway Setup Parameter PSTN-To-VoIP Gateway Enable PSTN CID For VoIP CID PSTN CID Number Prefix PSTN CID Name Prefix PSTN Caller Auth Method PST PIN Max Retry PSTN Ring Thru Line 1 PSTN Caller Default DP PSTN Caller ID Pattern Description Enable or disable PSTN-To-VoIP Gateway functionality. If set to "no", gateway is disabled but PSTN calls still ring through Line 1 (if is enabled) If set to "yes", the outbound VoIP call will assume the caller-id of the PSTN caller, if PSTN caller ID is available. Otherwise, the PSTN Line's VoIP account information is used. The PSTN Caller ID is after the application of and A prefix to prepend to the PSTN caller ID number when ringing through Line 1 or used in outbound VoIP call. Note that most caller-id devices can only display 0-9 for the caller number field. A prefix to prepend to the PSTN caller ID name when ringing through Line 1 or used in outbound VoIP call. Method to be used to authenticate a PSTN Caller for VoIP gateway services. Choose from {none, PIN} Number of trials to allow a PSTN Caller to enter a valid PIN number. If enabled, incoming calls will also ring Line 1 (after a delay as specified in ). Hence the Line 1 user can accept call waiting from the PSTN side. The caller-id from the PSTN service, if available, will be passed onto Line 1 also when ringing through (For this to work, the ring through delay must be set long enough such that PSTN caller-id is completely decoded before the SPA sends caller-id signal to the FXS port). Index of the dial plan in the dial plan pool to be used for the PSTN caller who does not require authentication (when authentication method is none, or when the caller's number is in the access list). Choose from {1, 2, 3, 4, 5, 6, 7, 8} A comma separated list of caller number templates such that PSTN callers with numbers not matching any of these templates will be rejected for VoIP gateway service regardless of the setting of the authentication method. The comparison is applied before access list is applied. If this parameter is blank (not specified), all callers will be considered for VoIP gateway service. The PSTN service must include Type I Caller-ID Delivery Service for this feature to work properly. If caller-id is blocked or not available, the caller-id is assumed to be Default yes yes [blank] [blank] none 3 yes 1 [blank] © 2003 - 2004 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2) 62