Linksys SPA2002-ER User Guide - Page 60
Summary of SPA-3000 Configuration Parameters - configuration guide
UPC - 745883568222
View all Linksys SPA2002-ER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
4.13.12. From Line 1 Route 311 and 911 Calls to PSTN-Gateway Insert the rule "[39]11" to [Line 1], and set - [PSTN Line] = none When the user picks up the Line 1 phone and dials 311 or 911, the call is routed to the PSTN gateway. 4.14. Summary of SPA-3000 Configuration Parameters This section summarizes the parameters that are specific to the SPA-3000 only. Other parameters not included here are similarly defined as in SPA-2000; please consult the SPA administration guide for details for those common parameters. 4.14.1. PSTN Line - Dial Plans Parameter Dial Plan 1 Dial Plan 2-8 Description The first of 8 dial plans in the dial plan pool to be associated with a VoIP Caller or a PSTN Caller. Each dial plan in the pool is referenced by a index 1 to 8 corresponding to Dial Plan 1 to 8. The dial plan syntax is the same as that used for Line 1 (except that the identifiers gw0 - gw4 are not supported here) Same as above with '1' replaced by '2' - '8' Default (xx.) (xx.) 4.14.2. PSTN Line - VoIP-To-PSTN Gateway Setup Parameter VoIP-To-PSTN Gateway Enable VoIP Caller Authentication Method VoIP PIN Max Retry One Stage Dialing Line 1 VoIP Caller DP VoIP Caller Default DP Line 1 Fallback DP Description Enable/Disable VoIP-To-PSTN Gateway functionality Method to be used to authenticate a VoIP Caller before granting access th PSTN gateway. Choose from {none, PIN, HTTP Digest} Number of trials to allow VoIP caller to enter a PIN number (used only if authentication method is set to PIN) Enable one-stage dialing (applicable if authentication method is none, or HTTP Digest, or caller is in the Access List) Index of the dial plan in the dial plan pool to be used when the VoIP Caller is calling from Line 1 of the same SPA-3000 unit during normal operation (ie, not due to fallback to PSTN service when Line 1 VoIP service is down). Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8} Note: Authentication is skipped for Line 1 VoIP caller Index of the dial plan in the dial plan pool to be used when the VoIP Caller is not authenticated. Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8} Index of the dial plan in the dial plan pool to be used when the VoIP Caller is calling from Line 1 of the same SPA-3000 unit due to fallback to PSTN service when Line 1 VoIP service is down or no Ethernet Default yes none 3 yes 1 1 1 © 2003 - 2004 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2) 60