Linksys UC540W-BRI-K9 Quick Start Guide - Page 16
Verifying the Hardware Installation - support
![]() |
UPC - 882658285257
View all Linksys UC540W-BRI-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
5 Verifying the Hardware Installation To verify the hardware installation, complete the following tasks: • Check the status of the UC 540 by looking at the LEDs on the front panel See LEDs, page 8. • Check that the devices connected to the PoE ports are all receiving power. Verify the communications. • To test IP connectivity, launch a Web browser and enter http://192.168.10.1. When the authentication window appears, this means that your system is active. • Make sure that each connected IP phone displays an internal extension number or a line number, on at least one of the phone line buttons. Verify the phone connectivity by making a call from one phone to another. NOTE If you need help resolving a problem, go to the Cisco Small Business Support Community website at: http://www.cisco.com/ go/smallbizsupport. For technical documentation and other links, see Suggested Next Steps, page 20 and Where to Go From Here, page 21. 6 Cisco Unified Communications 500 Series Model UC 540 Quick Start Guide 15
![](/manual_guide/products/linksys-uc540wbrik9-quick-start-guide-a95387e/16.png)