Linksys UC540W-BRI-K9 Quick Start Guide - Page 18

Connecting to the UC 540 This section describes how to connect your PC to the UC 540 and how to use CCA to connect to the UC 540. Before you connect your PC, do the following: • Disable all network interface Cards (NICs) that are not directly connected to the UC 540. • Disable the wireless network card. • Turn off any third-party FTP or TFTP services. • Temporarily disable any software firewalls running on the PC. To connect to the UC 540: STEP 1 Connect an Ethernet cable to one of the PoE ports on the front panel of the UC 540. Connect the other end of the cable to the Ethernet port on your PC. Verify that the PC is set to use the Dynamic Host Configuration Protocol (DHCP) to obtain its networking parameters (such as IP Address, Subnet Mask, Default Gateway, DNS Server, and so forth). 275525 CONSOLE SYS POE VM WLAN POWER ETHERNET CF PWR LNK PWR LNK PWR LNK PWR LNK PWR LNK PWR LNK PWR LNK PWR LNK UC 540 PoE port Cisco Small Business Pro Unified Communications 500 Series UC540 with FXO PFO COMPACT FLASH Cisco Configuration Assistant STEP 2 From CCA, open the Connect window and click Add a New Site. This is the preferred way to connect to a Cisco Smart Business Communications System (SBCS). STEP 3 Enter the name and description for the new customer site. STEP 4 From the Discover Devices drop-down menu, select Using a Starting IP address. Cisco Unified Communications 500 Series Model UC 540 Quick Start Guide 17