Linksys VGA2100 Administration Guide - Page 75
Verifying Your VGA2100 Installation:
UPC - 745883567676
View all Linksys VGA2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter Linksys One Communications Solution Verifying Your VGA2100 Installation: 1. Once the VGA2100 has fully booted, verify the following LED behavior: SYSTEM LED Green when up; red when down. LINE LEDS Green when the VGA2100 is connected to the public telephone network and the line is available. Flashing green when the line is in use. Red when the line is not registered with the Services Router. LAN LED Green/green flash when the VGA2100 is connected to the Services Router. RED when there is no LAN connection available. RESET LED Flashes red when the VGA2100 is resetting RJ-11 DC 48V LAN USB PHONE 1 PHONE 2 PHONE 3 Connect the LINE ports on the VGA2100 to the Public Telephone Network. 2. Open the Administration Editor for the SVR3000 and check the status for the VGA2100. See the "Viewing the Status of Data Devices" in Chapter 5. 3. If the Voice Gateway is not operating properly, see the "Troubleshooting the Voice Gateway" section in Chapter 8. For information on how to assign lines and associate PSTN numbers with a voice gateway, see "Assigning a Phone Line to an FXS Port" and "Assigning Lines to Devices" in Chapter 5. 140125 4 68 Chapter 4: Installation Adding a Linksys One Voice Gateway to the Network