Logitech 930-000011 Owners Manual - Page 8
Connecting Transporter
UPC - 097855045713
View all Logitech 930-000011 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting Transporter Unbalanced Analog Outputs Digital Inputs Optical Coax BNC AES/EBU TOSLINK S/PDIF S/PDIF Balanced Logitech® Antenna Connectors Balanced Analog Outputs Optical Coax BNC AES/EBU Word Infrared Ethernet S/PDIF S/PDIF Balanced Clock Input Output Input RS-232 Serial AC Power 1. Connect an output from the Transporter to your stereo amplifier, preamp, or receiver with the appropriate interconnect. The most common connection uses the unbalanced analog output red and white RCA connectors to connect to a line-level input, such as a CD or TAPE input. (Note: Transporter's outputs are not compatible with PHONO inputs.) More details about Transporter's audio connections are available in the Audio Connections section. 2. If you are using an ethernet network connection with your Transporter, connect an ethernet cable from your hub or switch to Transporter. Otherwise, screw the included wireless antennae to the two gold antenna connectors on Transporter. 3. Put the two AA batteries into the remote control. 4. Connect the included power cable to Transporter and plug it in. You can leave Transporter plugged in all the time. When not in use, it enters standby mode and dims the display. You can also dim the display by pressing the brightness button on the remote or front panel.