Logitech 966167-0403 Manual - Page 6

Connect the Mini-receiver - cordless

Page 6 highlights

Connect the Mini-receiver The Logitech® Cordless Presenter™ communicates with your notebook computer or desktop PC via a minireceiver. The mini-receiver plugs directly into the USB port of your computer (picture 1). For added convenience, use the extension cable (picture 2). The mini-receiver's red LED will blink quickly for 15 minutes until a radio frequency connection is made with the presentation device. You make this connection by pressing the Connect button on the Logitech® Cordless Presenter™. If this connection is not made within 15 minutes after plugging the minireceiver into the USB port, the minireceiver will time out. (The minireceiver's red LED will blink slowly.) To establish a connection, press the Connect button on the mini-receiver (picture 3), then press the Connect button on the presentation device. USB port USB port 1 2 Mini-receiver Extension cable Mini-receiver Connect button on bottom of mini-receiver 3 2 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

2
English
Connect the Mini-receiver
The Logitech
®
Cordless Presenter
communicates with your notebook
computer or desktop PC via a mini-
receiver.
The mini-receiver plugs directly
into the USB port of your computer
(picture 1).
For added convenience,
use the extension cable (picture 2).
The mini-receiver’s red LED will blink
quickly for 15 minutes until a radio
frequency connection is made with
the presentation device. You make
this connection by pressing the
Connect button on the Logitech
®
Cordless Presenter
.
If this connection is not made within
15 minutes after plugging the mini-
receiver into the USB port, the mini-
receiver will time out. (The mini-
receiver’s red LED will blink slowly.)
To establish a connection, press the
Connect button on the mini-receiver
(picture 3), then press the Connect
button on the presentation device.
1
2
3
Mini-receiver
Mini-receiver
Extension cable
USB port
Connect button on bottom
of mini-receiver
USB port