Logitech 966167-0403 Manual - Page 7

Install the Batteries 1 The Logitech® Cordless Presenter™ uses two AA alkaline batteries. Install the batteries before installing the software. 1. Remove the battery door (picture 1). Place your thumb on the indentation at the top of the battery door. Gently press down and carefully slide the door off. 2. Insert the batteries (picture 2). Use the diagram inside the battery compartment to install the batteries correctly. 3. Replace the battery door (picture 3). Align the battery door in the groove that outlines the battery compartment. Carefully slide 2 the battery door forward to secure it. Do not force the door; it should slide easily into place. Battery Status LED • The Battery Status LED above the Back (right) button is green for two seconds after the presentation device is switched on. • The Battery Status LED turns red and blinks slowly when battery power is low. (Replace the batteries.) 3 • The Battery Status LED is red continuously when battery power is nearly gone. (Replace the batteries immediately.) Battery Life When not in use, make sure to move the Mode Switch to the Off position to conserve battery power. Depending upon usage, battery life is estimated to be from 60-to-100 hours. 3 English