Logitech 966167-0403 Manual - Page 8

Battery Warning! When battery power is low for the presentation device, the Battery Status LED turns red and blinks slowly. In addition, the cursor on your screen may not move, it may move erratically when you move the presentation device, or the MouseWare® software may display a dialog box in Windows® 98, Windows® 98 SE, Windows® 2000, Windows® Me, and Windows® XP suggesting that you change the batteries. It is recommended that you promptly change your batteries to avoid any battery leakage. (See "Battery Status LED" and "Battery Life" in this manual for more information.) If your batteries leak, use normal precaution and follow the battery manufacturer's recommendations. When replacing batteries, use alkalines. You may use other battery types, but do not mix them with alkaline batteries. Note that the battery level indicator in the Mouse Properties is calibrated for alkaline batteries only, and will not give an accurate indication of battery life for batteries other than alkalines. Discard all used batteries according to the battery manufacturer's instructions. Exercise care when handling batteries. When batteries are misused, they may explode or leak, causing burns and personal injury. Do not open a battery or mutilate, dispose of in a fire, expose to heat above 130° F (54° C), immerse in water, install improperly, or recharge. Conducting materials, such as rings, bracelets, and keys, can short out a battery causing it to overheat and possibly leak or explode. When you are not using your presentation device for long periods of time, remove the batteries and store them in a dry place at normal room temperature. Install the Software To use all the features of the Logitech® Cordless Presenter™, make sure to install the software. 1. With your computer running, insert the software CD into the CD-ROM drive of the computer. 2. Follow the on-screen instructions to finish installing the software. 3. Use the software wizard to setup the presentation device. 4 English