Lowrance HDS-7 Gen3 Installation Manual US - Page 46
Ethernet setup
View all Lowrance HDS-7 Gen3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Commonly used sentences are enabled by default. NMEA 0183 over Ethernet The NMEA 0183 data stream is also output over ethernet, which is made available to tablet devices and PCs, using the WIFI-1 wireless adaptor. The Ethernet dialogue provides IP and port data typically required for configuring the application on the third party device. Note: Other MFDs can't decode this information back to NMEA 0183, to use the data as a source. To share data a physical NMEA 2000 or NMEA 0183 connection is still required. Ethernet setup No special setup is required for establishing an ethernet network, it is all 'plug and play' . An optional NEP-2 connected between the HDS Gen3 and another network module (e.g. 4G radar) will automatically start working, and relay data between the two devices. Diagnostics The UDB (User Data Base) tab on the diagnostics page, provides information on Ethernet activity, as shown below. 44 | The 'Reset Display List' can be used to refresh the list of connected Software setup | HDS Gen3 Installation Manual