Lowrance HDS-9 Gen3 Operators Manual US - Page 69
Viewing the recorded sounder data, The log file is displayed as a paused image, and you control - review
View all Lowrance HDS-9 Gen3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
When the Sonar image is being recorded, there is a flashing red symbol in the top left corner and a message will appear periodically at the bottom of the screen. The recording is stopped by selecting the Log Sonar function and then selecting Stop. The following options are available: Filename Specify the name of the recording (log). File format Select a file format from the drop-down, slg (Sonar only), xtf (Structure only), or sl2 (Sonar & Structure). Ú Note: XTF format is for use only with select 3rd party sonar viewing tools. Bytes per sounding Select how many bytes per seconds that are to be used when saving the log file. More bytes yield better resolution, but cause the record file to increase in size compared to using lower byte settings. Create StructureMap when completed If StructureScan is available on the network, you can convert the loggings to StructureMap format (.smf) after recording. The log file can also be converted to StructureMap format from the Files option. Viewing the recorded sounder data Both internally and externally stored sounder records may be reviewed when selected. The log file is displayed as a paused image, and you control the scrolling and display from the replay menu option. You can use the cursor on the replay image, and pan the image as on a normal echo image. If more than one channel was recorded in the selected echo file, you can select which channel to display. You exit the replay mode by pressing the X key or by selecting the X symbol in the upper right corner of the replay image. Sonar | HDS Gen3 Operator Manual 69