MSI 865GM2-LS User Guide - Page 66
Onboard Serial Port 1/Onboard Serial Port 2 865PE only
UPC - 816909004168
View all MSI 865GM2-LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
BIOS Setup Onboard Serial Port 1/Onboard Serial Port 2 (865PE only) Select an address and corresponding interrupt for the first and second serial ports. The settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto. UART Mode Select This setting allows you to specify the operation mode for serial port 2. Setting options: IrDA, ASKIR, Normal. Normal IrDA ASKIR RS-232C Serial Port IrDA-compliant Serial Infrared Port Amplitude Shift Keyed Infrared Port RxD, TxD Active This setting controls the receiving and transmitting speed of the IR peripheral in use. Setting options: Hi/Hi, Hi/Lo, Lo/Hi, Lo/Lo. IR Transmission Delay This setting determines whether the IR transmission rate will be delayed while converting to receiving mode. Setting options: Disabled, Enabled. UR2 Duplex Mode This setting controls the operating mode of IR transmission/reception. Setting options: Full, Half. Under Full Duplex mode, synchronous, bidirectional transmission/reception is allowed. Under Half Duplex mode, only asynchronous, bi-directional transmission/reception is allowed. Use IR Pins Please consult your IR peripheral documentation to select the correct setting of the TxD and RxD signals. Setting options: RxD2/TxD2, IRRx2Tx2. Onboard Parallel Port There is a built-in parallel port on the on-board Super I/O chipset that provides Standard, ECP, and EPP features. It has the following options: Disabled 3BC/IRQ7 278/IRQ5 378/IRQ7 Line Printer port 0 Line Printer port 2 Line Printer port 1 3-21