MSI 865GM2-LS User Guide - Page 67
Parallel Port Mode, SPP/EPP/ECP/ECP+EPP, EPP Mode Select, ECP Mode Use DMA, PWRON After PWR-fail
![]() |
UPC - 816909004168
View all MSI 865GM2-LS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
MS-6743 M-ATX Mainboard Parallel Port Mode SPP : Standard Parallel Port EPP : Enhanced Parallel Port ECP : Extended Capability Port ECP + EPP: Extended Capability Port + Enhanced Parallel Port SPP/EPP/ECP/ECP+EPP To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To operate the onboard parallel port in the EPP mode simultaneously, choose "EPP." By choosing "ECP", the onboard parallel port will operate in ECP mode only. Choosing "ECP + EPP" will allow the onboard parallel port to support both the ECP and EPP modes simultaneously. EPP Mode Select The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the following message will be displayed on the screen: "EPP Mode Select." At this time either EPP 1.7 spec or EPP 1.9 spec can be chosen. ECP Mode Use DMA The ECP mode has to use the DMA channel, so choose the onboard parallel port with the ECP feature. After selecting it, the following message will appear: "ECP Mode Use DMA." At this time, the user can choose between DMA channel 3 or 1. PWRON After PWR-fail This item specifies whether your system will reboot after a power failure or interrupt occurs. Available settings are: Off Leaves the computer in the power off state. On Leaves the computer in the power on state. Former-sts Restores the system to the status before power failure or interrupt occurred. 3-22
![](/manual_guide/products/msi-865gm2ls-user-guide-65768ca/67.png)