MSI 865PE NEO2-PFS User Guide - Page 51
IrDA Infrared Module Header: JIR1, Chassis Intrusion Switch Connector: JCI1 - p bios
UPC - 816909005110
View all MSI 865PE NEO2-PFS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
MS-6728 ATX Mainboard IrDA Infrared Module Header: JIR1 The connector allows you to connect to IrDA Infrared module. You must configure the setting through the BIOS setup to use the IR function. JIR1 is compliant with Intel® Front Panel I/O Connectivity Design Guide. JIR1 Pin Definition Pin Signal 1 NC 2 NC 3 VCC5 4 GND 5 IRTX BATT + 6 IRRX JIR1 5 1 6 2 Chassis Intrusion Switch Connector: JCI1 This connector is connected to a 2-pin chassis switch. If the chassis is opened, the switch will be short. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record. GND 2 CINTRU 1 JCI1 BATT + 2-30
2-30
MS-6728 ATX Mainboard
BATT
+
BATT
+
IrDA Infrared Module Header: JIR1
The connector allows you to connect to IrDA Infrared module. You
must configure the setting through the BIOS setup to use the IR function.
JIR1 is compliant with Intel
®
Front Panel I/O Connectivity Design Guide.
Chassis Intrusion Switch Connector: JCI1
This connector is connected to a 2-pin chassis switch. If the chassis is
opened, the switch will be short. The system will record this status and show
a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
JIR1
6
5
2
1
JCI1
2
1
GND
CINTRU
Pin
Signal
1
NC
2
NC
3
VCC5
4
GND
5
IRTX
6
IRRX
JIR1 Pin Definition