MSI 865PE NEO3-F User Guide - Page 56
PCI Slot1 IRQ Priority, PCI Slot2/5 IRQ Priority, PCI Slot3 IRQ Priority, PCI Slot4
UPC - 816909006711
View all MSI 865PE NEO3-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
MS-6728 ATX Mainboard [AGP/PCI] [PCI/AGP] [PCI/Int-VGA] The system initializes the installed AGP card first. If an AGP card is not available, it will initialize the PCI VGA card. The system initializes the installed PCI VGA card first. If a PCI VGA card is not available, it will initialize the AGP card. The system initializes the installed PCI VGA card first. If a PCI VGA card is not available, it will initialize the onboard VGA device. (For 865G) PCI IDE BusMaster Set this option to [Enabled] to specify that the IDE controller on the PCI local bus has bus mastering capability. Setting options: [Disabled], [Enabled]. PCI Slot1 IRQ Priority, PCI Slot2/5 IRQ Priority, PCI Slot3 IRQ Priority, PCI Slot4 IRQ Priority These items specify the IRQ line for each PCI slot. Setting options: [3], [4], [5], [7], [9], [10], [11], [Auto]. Selecting [Auto] allows BIOS to automatically determine the IRQ line for each PCI slot. Set IRQs to PCI or ISA Press to enter the sub-menu and the following screen appears: IRQ 3/4/5/7/9/10/11/14/15 These items specify the bus where the specified IRQ line is used. The settings determine if AMIBIOS should remove an IRQ from the pool of available IRQs passed to devices that are configurable by the system BIOS. The available IRQ pool is determined by reading the ESCD NVRAM. If more IRQs must be removed from the IRQ pool, the end user can use these settings to reserve the IRQ by assigning an [ISA/EISA] setting to it. Onboard I/O is configured by AMIBIOS. All IRQs used by onboard I/O are configured as [PCI/PnP]. If all IRQs are set to [ISA/EISA], and IRQ 14/ 15 are allocated to the onboard PCI IDE, IRQ 9 will still be available for PCI and PnP devices. Available settings: [ISA/EISA] and [PCI/PnP]. 3-18