MSI 865PE NEO3-F User Guide - Page 90
ATA Operate Mode
UPC - 816909006711
View all MSI 865PE NEO3-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
MS-6728 ATX Mainboard Introduction Following are the Parallel ATA (P-ATA) and Serial ATA (S-ATA) device configurations supported by Intel ICH5R. ATA Operate Mode There are two modes to select: Legacy mode and Native mode. Legacy Mode: --- In this mode, system BIOS just assign the traditional 14 and 15 IRQs to use for HDD. --- Older OSs that do not support switch to Native Mode (DOS, Win98/ME...) should set SATA and PATA to Legacy Mode. --- Maximum 4 ATA devices to connect. --- Combine mode and Non-Combine mode. hNon-Combined Mode:P-ATA devices only . Maximum of 4 devices. hNon-Combined Mode: S-ATA devices only. hCombined Mode: Maximum of 2 devices. S-ATA devices P-ATA devices Maximum of 2 devices each, thus total 4 devices at maximum. Native Mode: --- In this mode, system BIOS will search all available IRQs to use for HDD. --- New OS that support switch to Native Mode (WinXP, Win2K) can set SATA and PATA to Native Mode. --- Comprehend both Legacy and/or Native Modes. --- Maximum 6 ATA devices to connect (4 for P-ATA & 2 for S-ATA). MSI Reminds You... BIOS provides a BIOS setup option for Native Mode or Legacy Mode user selection. Please refer to P.3-20 On-Chip IDE Configuration for details. 5-2