MSI 945GZM5 User Guide - Page 52

BIOS Setup Re-Call VGA BIOS from S3 W hen ACPI Standby State is set to [S3], users can select the options in this field. Selecting [Yes] allows BIOS to call VGABIOS to initialize the VGA card when system wakes up (resumes) from S3 sleep state. The system resume time is shortened when you disable the function, but system will need an VGA driver to initialize the VGA card. Therefore, if the VGA driver of the card does not support the initialization feature, the display may work abnormally or not function after resuming from S3. Suspend Time Out (Minute) If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off. Power Button Function This feature allows users to configure the Power Button function. Settings are: [Power On/Off] The power button functions as a normal power-on/-off button. [Suspend] W hen you press the power button, the computer enters the suspend/sleep mode, but if the button is pressed for more than four seconds, the computer is turned off. Restore on AC Power Loss This setting specifies whether your system will reboot after a power failure or interrupt occurs. Available settings are: [Off] Leaves the computer in the power off state. [On] Leaves the computer in the power on state. [Last State] Restores the system to the previous status before power failure or interrupt occurred. High Performance Event Timer High Performance Event Timer (HPET) is needed to allow OS to discover event timers and establiish basic timer services for driver load. HPET Memory Address This item allows you to allot the Event Timer Block Registers Base Address to the memory. Wakeup Event Setup Press to enter sub-menu and the following screen appears. 3-15