MSI Eclipse User Guide - Page 83
Hardware Installation - drivers
View all MSI Eclipse manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
MS-7520 Mainboard Hardware Installation Installing the Card The interface of X-Fi Xtreme Audio Card is PCI-E x1. You can install it to the PCI-E slot. Follow the steps below to install the card, then you can activate the advanced function and enjoy the audio effect. 1. Turn off your computer and disconnect the power cord. 2. Open and remove the case of the computer. 3. Find an empty PCI-E x1 slot. Or you can also install it to PCI-E x4, or x16 slot, only the speed remains x1. 4. Remove the bracket which may obstruct the PCI-E x1 slot. 5. Gently but firmly install the X-Fi Xtreme Audio Card to the PCI-E slot and secure the card bracket with a screw. 6. Replace and secure the case. Reconnect the power cord to the computer. Select Audio Controller If your mainboard integrates audio function or an audio card installed, after installing the X-Fi Xtreme Audio Card and its driver, there will be two audio controllers available on your system. Either one can be selected and used at a time. Please follow the steps below to select and operate. 1. Go to Control Panel, double click on the Sound and Audio Devices. 2. Select Sound Blaster X-Fi Xtreme Audio in the Default Device drop-down menus of Audio and Voice tags. 3. Click OK button to save settings and close the window. 4. If you need to use the function of another audio controller, select the corresponding option. A-4