MSI Fuzzy User Guide - Page 30
Front Panel Connector: JFP1, Fan Power Connectors: CPUFAN1, SYSFAN1
View all MSI Fuzzy manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
MS-9642 Mainboard Fan Power Connectors: CPUFAN1, SYSFAN1 The fan power connectors support system cooling fan with +12V. When connecting the wire to the connectors, always take note that the red wire is the positive and should be connected to the +12V, the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. S EN SO R +12V GND S EN SO R +12V GND CPUFAN1 SYSFAN1 Important Please refer to the recommended CPU fans at Intel® official website or consult the vendors for proper CPU cooling fan. Front Panel Connector: JFP1 The mainboard provides one front panel connector for electrical connection to the front panel switches and LEDs. The JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide. JFP1 10 Power Switch + Power LED 2 9 + Reset - Switch - HDD 1 +LED JFP1 Pin Definition PIN SIGNAL 1 HD_LED + 2 FP PWR/SLP 3 HD_LED - 4 FP PWR/SLP 5 RST_SW - 6 PWR_SW + 7 RST_SW + 8 PWR_SW - 9 RSVD_DNU DESCRIPTION Hard disk LED pull-up MSG LED pull-up Hard disk active LED MSG LED pull-up Reset Switch low reference pull-down to GND Power Switch high reference pull-up Reset Switch high reference pull-up Power Switch low reference pull-down to GND Reserved. Do not use. 2-12