MSI Fuzzy User Guide - Page 35

Hardware Setup Jumpers LVDS Power Selection Jumper: J1 Use this jumper to specify the LVDS power. 1 J1 Pin Signal Name 1 VCC3 2 LCD_SRC (default VCC3) 3 VCC5 COM Port Power Jumpers: JCOMP4, JCOMP5 These jumpers specify the operation voltage of the serial port COM4 & COM5. 3 1 JCOM P4 3 1 JCOM P5 3 1 +5V 3 1 +5V 3 1 +12V 3 1 +12V Clear CMOS Jumper: CLR_CMOS1 There is a CMOS RAM onboard that has a power supply from external battery to keep the data of system configuration. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, set the CLR_CMOS1 (Clear CMOS Jumper ) to clear data. 1 1 1 CLR_CMOS1 3 Clear Data 3 Keep Data Important You can clear CMOS by shorting 1-2 pin while the system is off. Then return to 2-3 pin position. Avoid clearing the CMOS while the system is on; it will damage the mainboard. 2-17