MSI GF615M User Guide - Page 24
thIs sETTINg Is UsED TO ENAblE Or DIsAblE ThE CPu/Ldt Ht BUs mUlTIplIEr SprEAD
View all MSI GF615M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
DCT Unganged Mode This feature is used to Integrate two 64-bit DCTs into a 128-bit interface. Bank Interleaving Bank Interleaving is an important parameter for improving overclocking capability of memory. It allows system to access multiple banks simultaneously. Power Down Enable This is a memory power-saving technology. When the system does not access memory over a period of time, it will automatically reduce the memory power supply. MemClk Tristate C3/ATLVID This setting allows you to enable/disable the MemClk Tristating during C3 and ATLVID. FSB/DRAM Ratio This item will allow you to adjust the ratio of FSB to memory. Adjusted DRAM Frequency (MHz) It shows the adjusted memory frequency. Read-only. HT Link Speed Configuration Press to enter the sub-menu. HT Link Speed Auto Setting to [Enabled], the system will detect the HT link speed automatically. HT Link Speed This item allows you to set the Hyper-Transport Link speed. Adjust PCI-E Frequency (MHz) This item allows you to adjust the PCI-E frequency. Auto Disable DRAM/PCI Frequency When set to [Enabled], the system will remove (turn off) clocks from empty DIMM and PCI slots to minimize the electromagnetic interference (EMI). DRAM Voltage (V)/ NB Voltage (V)/ HT Link Voltage (V) These items are used to adjust the voltage of CPU, Memory and chipset. CPU/LDT Spread Spectrum This setting is used to enable or disable the CPU/LDT (HT Bus multiplier) Spread Spectrum feature. PCIE Spread Spectrum This setting is used to enable or disable the PCIE Spread Spectrum feature. SATA Spread Spectrum This setting is used to enable or disable the SATA Spread Spectrum feature. 24