MSI K8MM-ILSR User Guide - Page 46
Suspend Time Out Minute, After AC Power Loss
UPC - 816909005738
View all MSI K8MM-ILSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
MS-6741 Micro-ATX Mainboard USB Wakeup From S3 This item allows the activity of the USB device to wake up the system from S3 (Suspend to RAM) sleep state. Settings: Enabled, Disabled. Power Management/APM Setting to Enabled will activate an Advanced Power Management (APM) device to enhance Max Saving mode and stop CPU internal clock. Settings: Disabled, Enabled. Suspend Time Out (Minute) After the selected period of system inactivity, all devices except the CPU shut off. Settings: Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60. Display Activity These items specify if the BIOS will monitor the activity of the specified hardware peripheral or component. If set to Monitor, any activity detected on the specified hardware peripheral or component will wake up the system or prevent the system from entering the power saving modes. Settings: Monitor, Ignore. Thermal Active Temperature If the CPU temperature reaches the upper limit preset in this setting, the warning mechanism will be activated. This helps you to prevent the CPU overheating problem. Power Button Function This feature sets the function of the power button. Settings are: On/Off The power button functions as normal power off button. Suspend When you press the power button, the computer enters the suspend/sleep mode, but if the button is pressed for more than four seconds, the computer is turned off. After AC Power Loss This setting specifies whether your system will reboot after a power failure or interrupt occurs. Available settings are: Power Off Leaves the computer in the power off state. Power On Leaves the computer in the power on state. Last State Restores the system to the previous status before power failure or interrupt occurred. Set WakeUp Events Press and the following sub-menu appears. 3-14