MSI MAG Z390 TOMAHAWK User Manual - Page 51
Serial COM Port 0 Settings [Auto], Super IO Configuration
View all MSI MAG Z390 TOMAHAWK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
fIGD Multi-Monitor [Disabled] Enables or disables the multi-screen output from integrated graphics and external graphics card. This item appears when Initiate Graphic Adapter set to PEG. [Enabled] Enables multi-screen function for both integrated and external graphics cards. [Disabled] Disables this function. f USB Configuration Sets the onboard USB controller and device function. Press Enter to enter the submenu. fUSB Controller [Enabled] Enables or disables all USB controller. fXHCI Hand-off [Enabled] Enables or disables XHCI hand-off support for the operating system without XHCI hand-off feature. fLegacy USB Support [Enabled] Sets Legacy USB function support. [Auto] The system will automatically detect if any USB device is connected and enable the legacy USB support. [Enabled] Enable the USB support under legacy mode. [Disabled] The USB devices will be unavailable under legacy mode. f Super IO Configuration Sets system Super I/O chip parameters including COM ports. Press Enter to enter the sub-menu. fSerial (COM) Port 0 Configuration Sets detailed configuration of serial(COM) port. Press Enter to enter the submenu. fSerial (COM) Port 0 [Enabled] Enables or disables serial port. fSerial (COM) Port 0 Settings [Auto] Sets serial port. If set to Auto, BIOS will optimize the IRQ automatically or you can set it manually. f Power Management Setup Sets system Power Management of ErP and AC Power Loss behaviors. Press Enter to enter the sub-menu. fErP Ready [Disabled] Enables or disables the system power consumption according to ErP regulation. [Enabled] Optimize the system power consumption according to ErP regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe devices. [Disabled] Disables this function. BIOS Setup 51