MSI MEG X570 UNIFY User Manual - Page 32
DIMM Slots, Memory module installation recommendation
![]() |
View all MSI MEG X570 UNIFY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
DIMM Slots DIMMA1 DIMMB1 Channel A Channel B DIMMA2 Memory module installation recommendation DIMMB2 DIMMA2 DIMMA2 DIMMB2 DIMMA1 DIMMA2 DIMMB1 DIMMB2 Important yyAlways insert memory modules in the DIMMA2 slot first. yyDue to chipset resource usage, the available capacity of memory will be a little less than the amount of installed. yyBased on processor specification, the Memory DIMM voltage below 1.35V is suggested to protect the processor. yySome memory modules may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory frequency if you want to operate the memory at the marked or at a higher frequency. yyIt is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking. yyThe stability and compatibility of installed memory module depend on installed CPU and devices when overclocking. yyDue to AM4 processor/ memory controller official specification limitation, the frequency of memory modules may operate lower than the marked value under the default state. Please refer www.msi.com for more information on compatible memory. 32 Overview of Components
![](/manual_guide/products/msi-meg-x570-unify-user-manual-e3e380e/32.png)