MSI MEG X570S UNIFY-X MAX User Manual - Page 31
DIMM Slots, Memory module installation recommendation
View all MSI MEG X570S UNIFY-X MAX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
DIMM Slots DIMMA1 DIMMB1 Channel A Channel B Memory module installation recommendation DIMMB1 DIMMA1 DIMMB1 ⚠⚠Important ∙∙Always insert memory modules in the DIMMB1 slot first. ∙∙Due to chipset resource usage, the available capacity of memory will be a little less than the amount of installed. ∙∙Based on processor specification, the Memory DIMM voltage below 1.35V is suggested to protect the processor. ∙∙Some memory modules may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial Presence Detect (SPD). Go to BIOS and find the DRAM Frequency! to set the memory frequency if you want to operate the memory at the marked or at a higher frequency. ∙∙It is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking. ∙∙The stability and compatibility of installed memory module depend on installed CPU and devices when overclocking. ∙∙Due to AM4 processor/ memory controller official specification limitation, the frequency of memory modules may operate lower than the marked value under the default state. Please refer www.msi.com for more information on compatible memory. Overview of Components 31