MSI MEG Z690 UNIFY-X User Manual - Page 52
JBAT1: Clear CMOS (Reset BIOS) Jumper, BIOS_SW1: Multi-BIOS Switch, Resetting BIOS to default values
![]() |
View all MSI MEG Z690 UNIFY-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
JBAT1: Clear CMOS (Reset BIOS) Jumper There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory. Keep Data (default) Clear CMOS/ Reset BIOS Resetting BIOS to default values 1. Power off the computer and unplug the power cord. 2. Use a jumper cap to short JBAT1 for about 5-10 seconds. 3. Remove the jumper cap from JBAT1. 4. Plug the power cord and Power on the computer. BIOS_SW1: Multi-BIOS Switch This motherboard has two built-in BIOS ROMs. If one is crashed, you can shift to the other for booting by sliding the switch. Multi-BIOS LED (Red: BIOS B, White: BIOS A) BIOS B BIOS A (Default) ⚠⚠Important ∙∙Do not use the Multi-BIOS switch when system is booting up. ∙∙You can also use the MSI Center or Flash BIOS Button to flash BIOS. Please refer to BIOS section for details. 52 Overview of Components
![](/manual_guide/products/msi-meg-z690-unifyx-user-manual-bcc132b/52.png)