MSI P35 NEO COMBO-F User Guide - Page 22
Installing Memory Modules
UPC - 816909039276
View all MSI P35 NEO COMBO-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
MS-7365 Mainboard Installing Memory Modules 1. The memory module has only one notch on the center and will only fit in the right orientation. 2. Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot. Important You can barely see the golden finger if the memory module is properly inserted in the DIMM slot. 3. The plastic clip at each side of the DIMM slot will automatically close. Volt Notch Important - In Dual-Channel mode, make sure that you install memory modules of the same type and density in different channel DIMM slots. - To enable successful system boot-up, always insert the memory modules into the DIMM _A1 or DIMM _A2 first. - Due to the chipset resource deployment, the system density will only be detected up to 3+GB (not full 4GB) when each DIMM is installed with a 2GB memory module. 2-8