MSI P35 NEO COMBO-F User Guide - Page 46
MS-7365 Mainboard, On-Chip ATA Devices, PCI IDE BusMaster, On-Chip SATA Controller, I/O Devices, COM
UPC - 816909039276
View all MSI P35 NEO COMBO-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
MS-7365 Mainboard On-Chip ATA Devices Press to enter the sub-menu and the following screen appears: PCI IDE BusMaster This item allows you to enable/ disable BIOS to used PCI busmastering for reading/ writing to IDE drives. On-Chip SATA Controller This setting is used to specify the operating mode for SATA devices. I/O Devices Press to enter the sub-menu and the following screen appears: COM Port 1 Select an address and corresponding interrupt for the first serial port. Parallel Port There is a built-in parallel port on the on-board Super I/O chipset that provides Standard, ECP, and EPP features. It has the following options: [3BC] Line Printer port 0 [278] Line Printer port 2 [378] Line Printer port 1 [Disabled] Parallel Port M ode [Normal] Stardand Parallel Port [EPP] Enhanced Parallel Port [ECP] Extended Capability Port [ECP& EPP] Extended Capability Port + Enhanced Parallel Port [Bi-Direction] To operate the onboard parallel port as Standard Parallel Port only, choose [Normal]. To operate the onboard parallel port in the EPP mode simultaneously, choose [EPP]. By choosing [ECP], the onboard parallel port will operate in ECP mode only. Choosing [ECP & EPP] will allow the onboard parallel port to support both the ECP and EPP modes simultaneously. 3-12