MSI X570-A PRO User Manual - Page 49

UMA Frame Buffer Size [Auto] optional, Integrated Graphics Configuration optional

Get MSI X570-A PRO PDF manuals and user guides View all MSI X570-A PRO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

fIpv4 PXE Support [Enabled] When Enabled, the system UEFI network stack will support Ipv4 protocol. This item will appear when Network Stack is Enabled. [Enabled] Enables the Ipv4 PXE boot support. [Disabled] Disables the Ipv4 PXE boot support. fIpv6 PXE Support [Enabled] When Enabled, the system UEFI network stack will support Ipv6 protocol. This item will appear when Network Stack is enabled. [Enabled] Enables the Ipv6 PXE boot support. [Disabled] Disables the Ipv6 PXE boot support. fSATA Mode [AHCI Mode] Sets the operation mode of the onboard SATA controller. [AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced Host Controller Interface) offers some advanced features to enhance the speed and performance of SATA storage device, such as Native Command Queuing (NCQ) and hot-plugging. [RAID Mode] Enables RAID function for SATA storage devices. fSATAx Hot Plug [Disabled] Allows user to enable or disable the SATA hot plug support. [Enabled] Enables hot plug support for the SATA ports. [Disabled] Disables hot plug support for the SATA ports. fHD Audio Controller [Enabled] Enables or disables the onboard High Definition Audio controller. f Integrated Graphics Configuration (optional) Adjusts integrated graphics settings for optimum system. Press Enter to enter the sub-menu. fInitiate Graphic Adapter [PEG] (optional) Selects a graphics device as the primary boot device. [IGD] Integrated Graphics Display. [PEG] PCI-Express Graphics Device. fIntegrated Graphics [Auto] (optional) If set to Force, BIOS will enable the integrated graphics controller. fUMA Frame Buffer Size [Auto] (optional) Selects a fixed amount of system memory allocated to the onboard graphics. This item will be available when Integrated Graphics is enabled. f USB Configuration Sets the onboard USB controller and device function. Press Enter to enter the submenu. fXHCI Hand-off [Enabled] Enables or disables XHCI hand-off support for the operating system without XHCI hand-off feature. BIOS Setup 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
49
BIOS Setup
f
Ipv4 PXE Support [Enabled]
When
Enabled
, the system UEFI network stack will support Ipv4 protocol. This item
will appear when
Network Stack
is Enabled.
[Enabled]
Enables the Ipv4 PXE boot support.
[Disabled]
Disables the Ipv4 PXE boot support.
f
Ipv6 PXE Support [Enabled]
When
Enabled
, the system UEFI network stack will support Ipv6 protocol. This item
will appear when
Network Stack
is enabled.
[Enabled]
Enables the Ipv6 PXE boot support.
[Disabled]
Disables the Ipv6 PXE boot support.
f
SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[AHCI Mode]
Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) offers some advanced features to enhance
the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
[RAID Mode]
Enables RAID function for SATA storage devices.
f
SATAx Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support.
[Enabled]
Enables hot plug support for the SATA ports.
[Disabled]
Disables hot plug support for the SATA ports.
f
HD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
f
Integrated Graphics Configuration (optional)
Adjusts integrated graphics settings for optimum system. Press
Enter
to enter the
sub-menu.
f
Initiate Graphic Adapter [PEG] (optional)
Selects a graphics device as the primary boot device.
[IGD]
Integrated Graphics Display.
[PEG]
PCI-Express Graphics Device.
f
Integrated Graphics [Auto] (optional)
If set to Force, BIOS will enable the integrated graphics controller.
f
UMA Frame Buffer Size [Auto] (optional)
Selects a fixed amount of system memory allocated to the onboard graphics. This
item will be available when
Integrated Graphics
is enabled.
f
USB Configuration
Sets the onboard USB controller and device function. Press
Enter
to enter the sub-
menu.
f
XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature.