MSI Z68MA User Guide - Page 46
CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2 Speed
View all MSI Z68MA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
BIOS Setup ▶ Parallel(LPT) Port Settings Select an address and corresponding interrupt for the parallel port. ▶ Device Mode Select the device mode for the parallel port. ▶ Hardware Monitor Press to enter the sub-menu. ▶ CPU Smart Fan Target Controls CPU fan speed automatically depending on the current temperature and to keep it with a specific range. If the current CPU temperature reaches the target value, the smart fan function will be activated. ▶ CPU/ System Temperature, CPU FAN/ SYS FAN 1/ 2 Speed These items show the current status of all of the monitored hardware devices/ components such as CPU temperature/ system temperature and all fans' speeds. ▶ Power Management Setup Press to enter the sub-menu. ▶ EuP 2013 Energy Using Products Lot 6 2013 (EUP) reduces power consumption when system is off or in standby mode. Note: When enabled, the system will not support RTC wake up event functions. ▶ Restore after AC Power Loss This item specifies whether your system will reboot after a power failure or interrupt occurs. Settings are: [Power Off] Always leaves the computer in the power off state. [Power On] Always leaves the computer in the power on state. [Last State] Restore the system to the status before power failure or interrupt occurred. ▶ Wake Up Event Setup Press to enter the sub-menu. ▶ Wake Up Event By Setting to [BIOS] activates the following fields, and use the following fields to set the wake up events. Setting to [OS], the wake up events will be defined by OS. ▶ Resume By RTC Alarm The field is used to enable or disable the feature of booting up the system on a scheduled time/date. ▶ Date/ HH:MM:SS If Resume By RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specific date/hour/minute/second specified in these fields (using the and to select the date & time settings). ▶ Resume By PCI or PCI-E Device When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCI or PCIe device. ▶ Resume From S3 by USB Device 2-8