Magic Chef MCD991ARB User Manual - Page 12

OPERATION PROCEDURE This section includes useful information about oven operation. 1 9 Plug power supply cord into a standard 3-pronged 12 Amp, 120V AC 60Hz power outlet. Time clock returns to the present time when the cooking time ends. 2 After placing the food in a suitable container, 1n When the STOP/CLEAR pad is touched during the open the oven door and put it on the glass tray. w oven operation, the oven stops cooking and all The glass tray and roller guide must always be in information retained. To erase all information(except place during cooking. the present time), touch the STOP/CLEAR pad 3 Close the door. Make sure that it is firmly closed. once more. If the oven door is opened during the oven operation, all information is retained. 4 11 The oven light is on when the microwave oven is operating. If the START pad is touched and the oven does not operate, check the area between the door and door seal for obstructions and make sure the door is 5 The oven door can be opened at any time during operation by pulling the handle of door. The oven closed securely. The oven will not start cooking until the door is completely closed or the program has will automatically shut off. been reset. 6 Each time a pad is touched, a BEEP will sound to acknowledge the touch. 7 The oven automatically cooks on full power unless set to a lower power level. Make sure the oven is properly installed and L plugged into the electrical outlet. 8 The display will show " : 0" when the oven is plugged in. WATTAGE OUTPUT CHART • The power-level is set by touching the POWER LEVEL pad. The chart shows the display, the power level and the percentage of power. Touch the POWER LEVEL pad once twice 3 times 4 times 5 times 6 times 7 times 8 times 9 times 10 times 11 times Power level (Display) P-HI P-90 P-80 P-70 P-60 P-50 P-40 P-30 P-20 P-10 P-00 Approximate Percentage of Power 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% 11