Magic Chef MCSCD6W3 User Manual - Page 11
Red Pressure Release Bu°on: This red bu°on, located on the Quick Release Faucet - parts
View all Magic Chef MCSCD6W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
E) With both hoses connected, make sure you can plug the power cord into a 120 volt, grounded AC outlet, then turn the dishwasher so it is facing forward. F) Red Pressure Release BuƩon: This red buƩon, located on the Quick Release Faucet Adapter, is used to release the water line pressure. When you first connect to the water faucet, you can press the red buƩon to check the water is at the desired temperature or to use the faucet normally without removing the whole Quick Release Faucet Adapter. Red Pressure Release BuƩon Water Hose Drain Hose Red Pressure Release BuƩon This part can be unscrewed into two parts to adjust for different faucet sizes. This end connects to the sink faucet. G) With all the fiƫngs connected, open the water tap to test to make sure there are no leaks. Connect the A/C power cord and use the dishwasher as outlined in the manual. H) When finished using the dishwasher, you need to close the water supply at the tap and disconnect the power supply cord. ! WARNING The water intake hose is now pressurized. Press the Red Pressure Release BuƩon on the Quick Release Faucet Adapter, which will depressurize the water intake hose to easily remove without squirƟng water, which can be very hot and cause scalding or personal injury. The Quick Release Faucet Adapter should then be disconnected from the faucet and stored for its next use. CAUTION: Do not let children disconnect the dishwasher. Close supervision of children is always important around the appliance. -PAGE 10-