Magic Chef MCSCD6W3 User Manual - Page 19
Using The Delay Feature, Pausing The Wash Cycle Sequence
View all Magic Chef MCSCD6W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
USING THE DELAY FEATURE The start of the dishwasher can be delayed between 1 and 24 hours, using one hour increments. To uƟlize this feature: 1) Press "ON/OFF" buƩon to "ON" posiƟon 2) Press "PROGRAM" buƩon 3) Press "DELAY" buƩon once for each hour of delay (e.g. press buƩon 3 Ɵmes to delay start by 3 hours) To cancel the delay feature: 1) Press "ON/OFF" buƩon to "OFF" posiƟon. PAUSING THE WASH CYCLE SEQUENCE In order to make any changes to the selected wash cycle sequence, load addiƟonal items, or remove previously loaded items, the dishwasher must be put into "PAUSE" mode. The dishwasher can be put into "PAUSE" mode at any Ɵme during the wash cycle. To temporarily pause the washing process: 1) Press and hold the START/RESET buƩon for approximately 3 seconds to cancel the exisƟng program mode. 2) Make the necessary changes to the wash cycle sequence selecƟon or add/remove items from the dishwasher. 3) Ensure that the door is closed and the latch is fully engaged. 4) Press the START/RESET buƩon once. 5) The dishwasher will immediately resume operaƟon using the most recently selected wash cycle sequence. NOTE: The dishwasher will automaƟcally go into PAUSE mode if the door is opened. The door must be closed and the latch engaged for the dishwasher to resume operaƟon. Always use the above steps. -PAGE 18-