Magnavox 27MDTR20 User manual, English (US) - Page 24

T2132_1102_0102_EN1_0303 3/3/05 10:18 AM Page 24 24 Setting the Clock (cont'd) Instructions continued from the previous page. 4 If you already know your PBS channel number, skip ahead to step 8. If you do not know the channel number of your PBS station, press ▼ to select AUTO CLOCK CH SEARCH.Then press ENTER. 11 - SETTING CLOCK - AUTO CLOCK [ON] B AUTO CLOCK CH SEARCH AUTO CLOCK CH [02] MANUAL CLOCK SET D.S.T. [OFF] 4,7-9 ● The TV/DVD/VCR will search for a channel that carries a time signal. Channels that carry the time 5-6,10 will appear at the top of the screen. Use one of these channels when you enter your AUTO CLOCK CH at step 9. This may take several minutes. An ''_ _" appears in the lower left corner of the screen when the search is complete. - AUTO CLOCK CH SEARCH - 08 10 13 STANDBY-ON PICTURE SLEEP SELECT 123 CH. 456 789 +100 0 +10 SPEED C.RESET ZOOM VOL. MUTE RECORD PLAY STOP DISC MENU DISPLAY SETUP TITLE ENTER RETURN CLEAR SEARCH MODE REPEAT REPEAT A-B MODE AUDIO SUBTITLE ANGLE - - 5 Press SETUP to remove the AUTO CLOCK CH SEARCH screen. 6 Press SETUP to access the menu again. 7 Press ▲ or ▼ to select SETTING CLOCK. Then, press ENTER. 8 Press ▼ to select AUTO CLOCK CH, then press ENTER. - SETTING CLOCK - AUTO CLOCK [ON] AUTO CLOCK CH SEARCH B AUTO CLOCK CH [08] MANUAL CLOCK SET D.S.T. [OFF] 9 Press { or B until the channel number of your PBS station appears. Use the channel number you found at step 4. 10 Press SETUP to remove the menu. 11 Press STANDBY-ON to turn off the TV/VCR/DVD and let the PBS channel update the clock. Helpful Hints • During the Auto Clock Channel Search, the picture may be distorted.This is normal. • If there are no PBS stations available, set AUTO CLOCK to OFF. Set the clock manually. • If the TV/VCR/DVD is connected to a Cable Box or Satellite Receiver, select the local PBS station on the Cable Box/Satellite Receiver. Set the TV/VCR/DVD to the output channel of the Cable Box/Satellite Receiver (03, 04 or AUX).