Magnavox DP100MW8B User manual, English (US) - Page 17
INFORMATION, Troubleshooting Guide - reset
UPC - 053818570623
View all Magnavox DP100MW8B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
F Reset to the Default Setting (Except for PARENTAL Setting) 1 Press [SETUP]. SETUP STOP LANGUAGE AUDIO SUBTITLE DISC MENU PLAYER MENU 2 Select "INITIALIZE". ENTER INITIALIZE_INITIALIZE INITIALIZE YES ENTER 3 Select the desired PLAYER MENU Language, using [the Number buttons]. Press twice. SELECT MENU LANGUAGE 1 ENGLISH 2 FRENCH 3 SPANISH Note: • When you do not wish to initialize, press [SETUP] to exit the menu at step 2. INFORMATION Troubleshooting Guide INFORMATION If the unit does not perform properly when operated as instructed in this owner's manual, refer to the following. Problem No power No sound or picture Distorted picture Completely distorted picture or black/white picture with DVD No sound or distorted sound No audio at digital output No DTS audio is output. Picture freezes momentarily during playback. Disc cannot be played back. No return to start-up screen when disc is removed. The unit does not respond to the remote control. Buttons do not work or the unit stops responding. The unit does not respond to some operating commands during playback. The unit cannot read CD / DVD. Angle does not switch. Playback does not start when the title is selected. The password for rating level has been forgotten. Corrective action -Check if the AC power cord is properly connected. -Unplug the outlet once, and wait for 5-10 seconds and then plug it in again. -Check if the TV is switched on. -Check the video connection. -Check the audio/video cable connections to the TV. (Refer to page 6.) -Sometimes a small amount of picture distortion may appear. This is not a malfunction. -Connect the unit directly to the TV. -Set "PROGRESSIVE" correctly in "DISPLAY" menu. Turn it on only if your TV has progressive scan and you are using the component video connections between the unit and the TV. Disable progressive scan for all other connections. (Refer to page 6.) -Connect this unit directly to the TV. -Make sure the disc is compatible with the unit. -Adjust the volume. -Check that the speakers are connected correctly. -Check the digital connections. -Check if the audio format of the selected audio language matches your receiver capabilities. -This unit does not support DTS audio. This is not a malfunction. -Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge. -Clean the disc. -Ensure the disc is inserted in correct direction. -Check if the disc is defective by trying another disc. -Cancel the parental lock or change the control level. -Insert a correct disc that plays back on this unit. -Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface. -Reset the unit by switching off the unit, then on again. -Aim the remote control directly at the sensor on the front panel. -Reduce the distance to the unit. -Replace the batteries in the remote control. -Re-insert the batteries with their polarities (+/- signs) as indicated. -Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn up the volume. If you hear some signal sound from the radio by pressing buttons on the remote control, the remote control is working. -Press and hold any button on remote control toward a digital camera. The remote control is working if you confirm infrared light through the digital camera. -To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds. -Operations may not be permitted by the disc. Refer to the instructions of the disc. -Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair. -The angle cannot be switched for DVD which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes. -Check the "PARENTAL" setting. -Enter the default password "4737", then your forgotten password will be cleared. • Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner's manual for more details on correct operations. • Playback from a desired track and random playback are not available during programmed playback. • Some functions are prohibited on some discs. - 17 - EN