Magnavox DP100MW8B User manual, English (US) - Page 7

Connection to an Audio System Analog Audio Connection Audio stereo system analog audio input jacks L R This unit RCA audio cable AUDIO OUT L R AUDIO OUT Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 Please purchase the rest of the necessary cables at your local store. Digital Audio Connection Dolby Digital decoder, MD deck or DAT deck COAXIAL Digital audio input jack digital audio coaxial cable DIGITAL AUDIO OUT DIGITAL AUDIO OUT COAXIAL Connection Setting SETUP > AUDIO> DOLBY DIGITAL Connecting to a Dolby Digital decoder for Dolby Digital audio output. BITSTREAM Connecting to the other device (an MD deck or DAT deck etc.) without Dolby Digital decoder. PCM * To complete these settings, refer to pages 14-15. Note: • The audio source on a disc in a Dolby Digital multi-channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By hooking this unit up to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi-channel surround sound as heard in the movie theaters. • Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers. SETUP Rear Terminals 12 45 CB/PB Y L DIGITAL AUDIO OUT R CR/PR VIDEO OUT S-VIDEO COMPONENT OUT VIDEO OUT AUDIO COAXIAL OUT 3 1 S-VIDEO OUT jack Connect an optional S-video cable here through the S-video in jack of a television. 2 COMPONENT VIDEO OUT jacks Connect optional component video cable here through the component video in jacks of a television. 3 VIDEO OUT jack Connect a yellow video cable here through the video in jack of a television. 4 AUDIO OUT jacks Connect an audio cable here through the audio in jacks of a television or other audio device. 5 DIGITAL AUDIO OUT COAXIAL jack Connect a digital audio coaxial cable here through the digital audio coaxial in jack of a decoder or audio receiver. Note: • Please purchase the necessary cables at your local store. (Refer to pages 6-7.) - 7 - EN