Magnavox DV220MW9 User manual, English (US) - Page 22

RECORDING Satellite Link You can set the unit to start recording whenever it detects a video signal from the external tuner. Preparing for the Satellite Link: • Only L1 (rear) is available for satellite link and be sure that this L1 needs to be connected by the external tuner. • The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to the output audio/video signals when it comes to the time you want to start recording, and stop those signals when it comes to the time you want to finish recording. Refer to the tuner's manual on how to set the timer. L1 VCR DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y DVD/VCR AUDIO OUT L VCR L COAXIAL R AUDIO IN CB R VIDEO OUT VIDEO IN CR AUDIO IN To video out jack VIDEO IN external tuner To audio(L)out jack RCA audio/video cables VHS VCR Press first. 1 Press SPEED to select the desired tape speed. Note: • Recording picture will be distorted if the copy protection signal is being detected during satellite link. • When the timer recording and the satellite link are overlapped, those recordings are recorded as illustrated below. e.g.) In case of the satellite link is overlapped on the existing timer recording. timer recording satellite link recording result e.g.) In case of the timer recording is programmed in the middle of the satellite link. timer recording satellite link recording result e.g.) In case of the timer recording is overlapped on the existing satellite link. timer recording satellite link recording result SP Dubbing a Cassette Tape 2 SETUP In the stop mode, press . 3 Use / to select "SATELLITE LINK". Then, press to go to the next step. - M E N U - TIMER PROGRAMMING B SATELLITE LINK AUTO REPEAT [OFF] CLOCK SET LANGUAGE SELECT 4 Use / to select the desired hour. Then, press to go to the next step. SATELLITE LINK 0 1 : 0 0 PM Then, repeat procedures above to select the minute as well. The hour can be selected from 1-12 with AM or PM. When the external tuner signal is stopped, recording will be stopped. 5 Press to set satellite link standby mode. SATELLITE LINK 0 1 : 3 0 PM [ON] [TIMER REC] indicator: lights up and the unit goes to the DVD mode. If you do not use DVD function, turn OFF the unit. An external tuner must be turned ON for satellite link to start. If external tuner is not set to output signals, satellite link will remain in standby mode. To Cancel the Satellite Link on Standby: Press [TIMER SET] on the remote control or [STOP/EJECT C A] on this unit. To Cancel the Satellite Link in Progress: Press [STOP/EJECT C A] on this unit. Warning: Unauthorized recordings of copyrighted cassette tapes may be an infringement of copyright laws. output jacks of external device VIDEO OUT RCA video cable front of the unit VIDEO AUDIO AUDIO OUT or L RCA audio cable L2 R You can use a video disc player, cable/satellite box or other devices with the audio/video output jacks. VCR VHS Press first. 1) Press [SPEED] on the remote control to select recording speed (SP or SLP). 2) Press [INPUT] on the remote control to select L1 or L2 whichever the jack the external device is connected to. 3) Press [RECORD] on the unit, and then start playback of the external device. 4) To stop recording, press [STOP/EJECT C A] on this unit. 5) Stop playback of the external device. Note: • For best results during dubbing, use buttons on this unit whenever possible. The remote control might affect another device's operation. 22 EN