Magnavox DV220MW9 User manual, English (US) - Page 9
Rear Panel, Installing the Batteries for the Remote Control - dvd vcr
UPC - 053818570685
View all Magnavox DV220MW9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PRECAUTIONS Rear Panel PREPARATION 12 PREPARATION DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y DVD/VCR AUDIO OUT L VCR L COAXIAL R AUDIO IN CB R VIDEO OUT VIDEO IN CR L1 345678 BASIC OPERATIONS ADVANCED PLAYBACK RECORDING OPTIONAL SETTINGS TROUBLESHOOTING 1. DVD/VCR AUDIO OUT jack p.10 • Connect an RCA audio cable from here to the audio input jack of your television or audio device. Standard connection for DVD/VCR use. 2. VCR AUDIO IN jack p.22 • Connect an RCA audio cable from the audio output jack of your camcorder, VCR, etc. to here. 3. DIGITAL AUDIO OUT COAXIAL* jack p.12 • Connect a digital audio coaxial cable from here to the digital audio coaxial in jack of a decoder or audio receiver. 4. DVD AUDIO OUT* (analog) jack p.11 • Connect an RCA audio cable from here to the audio input jack of your television or audio device. 5. S-VIDEO OUT* jack p.11 • Connect an S-video cable from here to the S-video input jack of your television. 6. COMPONENT VIDEO OUT* jack p.11 • Connect component video cables from here to the component video input jacks of your television. 7. DVD/VCR VIDEO OUT jack p.10 • Connect an RCA video cable from here to the VIDEO input jack of your television or audio device. Standard connection for DVD/VCR use. 8. VCR VIDEO IN jack p.22 • Connect an RCA video cable from here to the video output jack of your camcorder, VCR, etc. * For enhanced DVD viewing. DVD/VCR video and audio connection required to view cassette tapes. Note: • RCA audio and video cables are included for both VCR and DVD viewing. You can enhance your DVD picture and sound quality with an S-video cable, component video cables, or a digital audio coaxial cable. Please purchase the necessary cables at your local store. (Refer to pages 11-12.) Installing the Batteries for the Remote Control Install the 2 AA (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote control. 30˚ 30˚ Keep the following in mind when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • The maximum operable ranges of the unit are: - Line of sight: approx. 23 feet (7m) - Either side of center: - Above: - Below: approx. 16 feet (5m) within 30° approx. 16 feet (5m) within 15° approx. 10 feet (3m) within 30° 16 feet (5m) 16 feet (5m) 23 feet (7m) Caution: Never throw batteries into a fire. Note: • Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc) or old batteries with fresh ones. Although they may look similar, different batteries may have different voltages. • If the remote control is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries; they can overheat and rupture. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations. EN 9 INFORMATION