Magnavox MC13D1MG User manual, English (US) - Page 30

MC13D1MG 3/22/02 1:26 PM Page 30 30 Rerecording (Tape Duplication) AUDIO and VIDEO OUT Jacks on source unit (VCR or Camcorder) Audio Cable from AUDIO OUT to AUDIO In VIDEO AUDIO OUT Video Cable from VIDEO OUT to VIDEO In 1 Make the connections shown above, using audio and video cables (not supplied). Connect the source unit (VCR or camcorder) to a power source after connections are made. 2 The VCR or camcorder will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press STOP on the unit. 3 The TV/VCR will record your tape. Insert a blank tape in the TV/VCR. Make sure the tape's record tab is intact. The TV/VCR power will turn on automatically. 4 Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that AUX appears on the screen. The TV/VCR is now in Line Input or Auxiliary mode. 5 Point the TV/VCR remote control at the TV/VCR. Press SPEED until the desired tape speed (SP or SLP) appears on the screen. 6 Press PLAY on the source unit and REC(ord)/OTR on your TV/VCR at the same time. Copying will begin. 7 To stop copying, press STOP/EJECT on the TV/VCR, then stop the tape on the VCR or camcorder. VIDEO AUDIO POWE AUDIO and VIDEO In Jacks on TV/VCR Helpful Hints • Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • Different brands of equipment may operate differently. • Make sure all connections are secure. Otherwise, you may not record both picture and sound. • Programs that are copyright protected may not record clearly.