Magnavox MC13D1MG User manual, English (US) - Page 8

MC13D1MG 3/22/02 1:26 PM Page 8 8 Setting TV Channels for the First Time The TV/VCR can memorize the channels you receive in your area. If you are using a Cable Box or Satellite Box, you do not need to set channels at the TV/VCR. Set the TV/VCR to the output channel of the Cable Box or Satellite Box (channel 03 or 04). Then select the channel to be viewed on the Cable Box or Satellite Box. If you do not see these menus when you turn on the TV/VCR, set TV channels as instructed on page 10 instead. 1 Press POWER to turn on the TV/VCR. 2 Press F.FWD/B or REW/s to select ENG- LISH or ESPAÑOL (Spanish). The selected language will appear inside the [ ]. - SET UP - B LANGUAGE [ENGLISH] ESPAÑOL AUTO PRESET POWER SLEEP/WAKE UP 1 2-3 REW PLAY STOP F.FWD MENU DISPLAY ALT.CH 123 CH. 456 789 SPEED 0 RESET +100 PAUSE/STILL VOL. RECORD TIME SEARCH MUTE 3 Press PLAY/v or STOP/w to select AUTO PRESET. Then press F.FWD/B. The TV/VCR scans and memorizes all active channels in your area. When scanning is complete, the TV/VCR will go to the lowest available channel automatically. Use the CH(annel) o/p buttons to select memorized channels. Use the Number buttons to select non-memorized channels. - SET UP - LANGUAGE [ENGLISH] ESPAÑOL B AUTO PRESET Helpful Hints • The TV/VCR distinguishes between standard TV channels and cable channels. • To play or record a video tape before setting TV channels, press the MENU button on the remote control. To set up channels later, see Resetting TV Channels on page 10. • To select cable channels higher than 99, press the +100 button, then press the Number buttons for the last two digits. For example, to select channel 125, press +100, 2, 5. Precede single-digit channel numbers with a zero (for example, 01 ... 09).